How to Build Wall Mounted Shoe Rack

Wall mounted shoe rack – is mounted on the wall or a support frame with hooks holding the crucible in the wall where you can easily access. Cut two 2x2s to any size length and two in width at any size. Determine the size of the shoe rack by measuring the area of the wall where it will be installed and decide what size rack that works best for the location.

Place the pieces on a table or other flat surface and put together a rectangle of wall mounted shoe rack, then place a corner bracket in each corner. Place the tip of the punch in every hole in the corner stand and tapped with a hammer to start a pilot hole, then turn the screw until it is secure. Do this for all four brackets.

Measure the center of the box horizontally from inside the 2x2s. Cut a 2×2 to the exact size and put it in the center of the rectangle of stage two, and install two T-brackets the same way as the installation of the corner supports for wall mounted shoe rack. With a pencil, mark the areas where the hook should be and the boat crash. Proof that all the shoes fit keeping the flat grill and place the shoes where the hooks are intended.

Best Post |  Fashionable Vertical Shoe Rack